Century's Temper Check Paste

Price on Request: Get Latest Price

Product Brochure

Century’s Tamper Check

 

Advantages: 

• Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, Joints and assemblies. 

• Tamper Check also provides warranty protection against tampering. 

• Marks will be easily broken if parts are tampered with or become loose. 

• Tamper proof marking & Torque marking paste.

• Highly visible Colours & Excellent adhesion as well a safe on metal & all other surfaces.

• Provides a Convenient a visual method for identification of vibratory loosening or              

tempering on nuts, bolts, Fasteners, and assemblies.

• High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement.

 

 

Directs of Use:

• Open Cap. Hold the marker vertically and squeeze the tube from bottom to Write

• Clean the tip and put the cap back on after each use.

• Use before 24 months for better result.

• Drying Time

 

Note: Drying will speed up on elevated temperature or on blowing of hot air.

 

STORAGE 

• Store locked up. 

• Keep away from heat, sparks and open flame. 

• Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. 

• Store in a tightly closed container as well as ventilated place.

Caution 

• Protect material from direct sunlight. 

• When using, do not smoke. 

• Explosion-proof general and local exhaust ventilation. 

• Take precautionary measures against static discharges. 

• All equipment used when handling the product must be grounded. 

• Use non-sparking tools and explosion-proof equipment. 

• Avoid contact with eyes. 

• Avoid prolonged exposure. 

• Wear appropriate personal protective equipment.

•  Observe good industrial hygiene practices

DISPOSAL 

• Collect and reclaim or dispose in sealed containers at licensed waste disposal site. 

• Dispose of contents/container in accordance with local/regional/national/international regulations

Price on Request: Get Latest Price

Product Brochure

Century’s Tamper Check Marker 

 

Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies. Loosening or tampering in nuts, bolts, fasteners, and assemblies. Tamper Check also provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. Highly visible under ambient light and fluorescent under UV light. Excellent adhesion to metal and other substrates. Colours available are Yellow, Orange, Blue, Green, Red, and White. 

Advantages: 

• Tamper proof marking & Torque marking paste.

• Safe for most of the surfaces

• Highly visible Colours.

• Excellent adhesion on metal & other surfaces.

• Mark will be easily broken if parts are tempered with or become loose.

• Provides a Convenient a visual method for identification of vibratory loosening or              

tempering on nuts, bolts, Fasteners, and assemblies.

• Yellow, Orange, Blue, Green, Red, and White fluoresce under black/UV light.

•  High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement.

 

Directs of Use:

• Open Cap. Hold the marker vertically and squeeze the tube from bottom to Write

• Clean the tip and put the cap back on after each use.

• Use before 24 months for better result.

• Drying Time

 

Note: Drying will speed up on elevated temperature or on blowing of hot air.

 

STORAGE 

• Store locked up. 

• Keep away from heat, sparks and open flame. 

• Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out o fdirect sunlight. 

• Store in tightly closed container. 

• Store in a well-ventilated place. 

Caution 

• Protect material from direct sunlight. 

• When using do not smoke. 

• Explosion-proof general and local exhaust ventilation. 

• Take precautionary measures against static discharges. 

• All equipment used when handling the product must be grounded. 

• Use non-sparking tools and explosion-proof equipment. 

• Avoid contact with eyes. 

• Avoid prolonged exposure. 

• Wear appropriate personal protective equipment.

•  Observe good industrial hygiene practices

DISPOSAL 

• Collect and reclaim or dispose in sealed containers at licensed waste disposal site. 

• Dispose of contents/container in accordance with local/regional/national/international regulations

Price on Request: Get Latest Price

Product Brochure

Century’s Tamper Check Marker 

 

Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies. Loosening or tampering in nuts, bolts, fasteners, and assemblies. Tamper Check also provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. Highly visible under ambient light and fluorescent under UV light. Excellent adhesion to metal and other substrates. Colours available are Yellow, Orange, Blue, Green, Red, and White. 

Advantages: 

• Tamper proof marking & Torque marking paste.

• Safe for most of the surfaces

• Highly visible Colours.

• Excellent adhesion on metal & other surfaces.

• Mark will be easily broken if parts are tempered with or become loose.

• Provides a Convenient a visual method for identification of vibratory loosening or              

tempering on nuts, bolts, Fasteners, and assemblies.

• Yellow, Orange, Blue, Green, Red, and White fluoresce under black/UV light.

•  High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement.

 

Directs of Use:

• Open Cap. Hold the marker vertically and squeeze the tube from bottom to Write

• Clean the tip and put the cap back on after each use.

• Use before 24 months for better result.

• Drying Time

 

Note: Drying will speed up on elevated temperature or on blowing of hot air.

 

STORAGE 

• Store locked up. 

• Keep away from heat, sparks and open flame. 

• Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out o fdirect sunlight. 

• Store in tightly closed container. 

• Store in a well-ventilated place. 

Caution 

• Protect material from direct sunlight. 

• When using do not smoke. 

• Explosion-proof general and local exhaust ventilation. 

• Take precautionary measures against static discharges. 

• All equipment used when handling the product must be grounded. 

• Use non-sparking tools and explosion-proof equipment. 

• Avoid contact with eyes. 

• Avoid prolonged exposure. 

• Wear appropriate personal protective equipment.

•  Observe good industrial hygiene practices

DISPOSAL 

• Collect and reclaim or dispose in sealed containers at licensed waste disposal site. 

• Dispose of contents/container in accordance with local/regional/national/international regulations

Price on Request: Get Latest Price

Product Brochure

Century’s Tamper Check Marker 

 

Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies. Loosening or tampering in nuts, bolts, fasteners, and assemblies. Tamper Check also provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. Highly visible under ambient light and fluorescent under UV light. Excellent adhesion to metal and other substrates. Colours available are Yellow, Orange, Blue, Green, Red, and White. 

Advantages: 

• Tamper proof marking & Torque marking paste.

• Safe for most of the surfaces

• Highly visible Colours.

• Excellent adhesion on metal & other surfaces.

• Mark will be easily broken if parts are tempered with or become loose.

• Provides a Convenient a visual method for identification of vibratory loosening or              

tempering on nuts, bolts, Fasteners, and assemblies.

• Yellow, Orange, Blue, Green, Red, and White fluoresce under black/UV light.

•  High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement.

 

Directs of Use:

• Open Cap. Hold the marker vertically and squeeze the tube from bottom to Write

• Clean the tip and put the cap back on after each use.

• Use before 24 months for better result.

• Drying Time

 

Note: Drying will speed up on elevated temperature or on blowing of hot air.

 

STORAGE 

• Store locked up. 

• Keep away from heat, sparks and open flame. 

• Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out o fdirect sunlight. 

• Store in tightly closed container. 

• Store in a well-ventilated place. 

Caution 

• Protect material from direct sunlight. 

• When using do not smoke. 

• Explosion-proof general and local exhaust ventilation. 

• Take precautionary measures against static discharges. 

• All equipment used when handling the product must be grounded. 

• Use non-sparking tools and explosion-proof equipment. 

• Avoid contact with eyes. 

• Avoid prolonged exposure. 

• Wear appropriate personal protective equipment.

•  Observe good industrial hygiene practices

DISPOSAL 

• Collect and reclaim or dispose in sealed containers at licensed waste disposal site. 

• Dispose of contents/container in accordance with local/regional/national/international regulations

Price on Request: Get Latest Price

Product Brochure

• Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, Joints and assemblies. 

• Tamper Check also provides warranty protection against tampering. 

• Marks will be easily broken if parts are tampered with or become loose. 

• Tamper proof marking & Torque marking paste.

• Highly visible Colours & Excellent adhesion as well a safe on metal & all other surfaces.

• Provides a Convenient a visual method for identification of vibratory loosening or              

tempering on nuts, bolts, Fasteners, and assemblies.

• High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement.